Dakota Ultrasonics MINI--MAX User Manual
Page 65
MINI-MAX Ultrasonic Bolt Tension Monitor
59
19) Press the ENTER key to display the Digits Edit Box.
Note: Enter the temperature coefficient value of the bolt that was
documented in the previous section. Reminder: The value was written
down and scribed on the side of the bolt. It is the temperature coefficient
used for the probe zero bolt.
20) Press the UP and DOWN arrow keys to scroll the highlighted value.
21) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
22) Repeat steps 20 & 21 until the TEMP COEF value is correctly
displayed.
23) Press the OK key to return to the One Point Zero List, or ESC to
cancel entering the TEMP COEF value.
24) Use the UP and DOWN arrow keys to scroll through the One Point
Zero List Items until ULTRASONIC LEN is highlighted.