Creating a group and destination – Apple Compressor 2 User Manual
Page 126
126
Chapter 9
Creating MPEG-1 Output Files
Step 3:
Configure the Audio settings
1
Click the Audio button in the MPEG-1 Encoder pane to open the Audio tab.
2
Select the Enabled box.
3
Choose 48 kHz from the “Sample rate” pop-up menu.
4
Select Stereo when using two-channel audio sources, or Mono when using one-
channel audio sources.
5
Choose the bit rate to use from the “Bit rate” pop-up menu.
The typical values used for DVD projects are 192 Kbps and 224 Kbps.
6
Select a different setting in the Setting tab of the Presets window.
This opens a dialog prompting you to save the current preset.
7
Select the Save button and click OK.
This saves the “MPEG-1 Audio for DVD” preset.
Creating a Group and Destination
To make it easy to use these two MPEG-1 presets with a source, you can create a preset
group using them. See “
” on page 75 for more information.
Also, to make it easier to use the output files created by these presets in
DVD Studio Pro, create a destination that ensures the video and audio output files have
the same name, only with different file extensions. See “
” on page 232 for more information.
Select to enable the
Audio tab.
Choose the 48 kHz
sample rate.
Select either
Stereo or Mono.
Choose the bit rate.