Configuring the mpeg-1 file format for web use, P. 122) – Apple Compressor 2 User Manual

Page 122

122

Chapter 9

Creating MPEG-1 Output Files

Configuring the MPEG-1 File Format for Web Use

The following steps guide you through configuring the MPEG-1 output file format for
web use. This process creates a single MPEG-1 system stream.

Step 1:

Open the MPEG-1 Encoder pane and choose Video settings

Open the Settings tab of the Presets window, then choose MPEG-1 from the “Create a
New Setting” ( + ) pop-up menu.

The MPEG-1 Encoder pane opens in the Inspector with the default Video tab displayed.

Select the Enabled box.

Choose Automatic from the “Frame rate” pop-up menu.

You can also choose 23.976, 29.97, or 25 if you know the frame rate of the source video.

Select the Web button.

This sets the resolution of the output to 320 x 240.

Choose the bit rate to use from the “Bit rate” slider, or enter a value directly.

Select to enable the

Video tab.

Choose the frame rate.

Select Web to set the

resolution to 320 x 240.

Choose the bit rate.