Barco CLM HD8 R9050130 - Manual (Page 69)

8. Input menu
When native resolution is on, some other menus such as Aspect ratio, timings are greyed out.
8.6 Source switching
Switching from one source to another
To minimize undesired effects when switching from one source to another one can use the switching mode, using the fade effect.
Image 8-16
Example of fade effect
Switching mode set up
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Source switching and press ENTER.
The Source switching menu is displayed.
4. Use the ▲ or ▼ key to select Effect and press ENTER to toggle between No transition and Fade.
No transition No source switching effect is activated.
Fade Fade in, fade out effect is activated. Transition time can be set up.
5. Use the ▲ or ▼ key to select Effect time and press ENTER.
6. Enter the desired time with the digit keys
Or,
use the ▲ or ▼ key to scroll until the desired time is reached. Press ENTER to activate.
Image 8-17
Image 8-18
Image 8-19
8.7 No signal
Overview
• Background color
• Shutdown setting
• Shutdown retarding time
R59770057 CLM HD8 15/03/2010 65