beautypg.com

Service menu – Barco CLM HD8 R9050130 User Manual

Page 169

background image

14. Service menu

4. Use the ▲ or ▼ key to select Overtemp DMD and press ENTER to toggle between [On] and [Off].

On

When temperature is too high, lamp mode is switched from 4 to 2 lamps. The 4 lamps mode can only be restored
after switching first to standby and restarting the projector.

If the temperature exceeds 64 °C, the projector is switched to standby.

Off

for a temperature between 60 and 64 °C the projector continues in normal operation but the warning is set on the
LCD display. Once the temperature is higher then 64 °C, then the projector is switched to standby.

The following text is displayed on the LCD: “DMD temperature to high. Please, check cooling liquid level ! Check
dust filters ! Press any key to confirm.”

Image 14-55

Image 14-56

Image 14-57

R59770057 CLM HD8 15/03/2010

165

This manual is related to the following products: