beautypg.com

Projector control – Barco CLM HD8 R9050130 User Manual

Page 150

background image

13. Projector control

The DMX monitor window opens. Depending on the DMX mode, the Normal view or the Simple view of the DMX monitor window
opens.

Image 13-46

Image 13-47

Image 13-48

Image 13-49

Image 13-50

When selecting DMX monitor and no DMX device is connected, the message “No DMX data, check connection
to display channels” appears on the screen. When ENTER is pressed the same window appears as
DMX Monitor but without values.

About motor control (channel 6 and 7)

If channel #6 is brought to 32 or more, this is the same as “motor” forward (as pushing the button on the side panel). It also disables
control of channel 7.

If channel #7 is brought to 32 or more, this is the same as “motor” reverse (as pushing the button on the side panel). It also disables
control of channel 6.

Both channels above 32 means no action.

Channel 6 and 7:

0 - 31

No action

31 - 255

Action start

146

R59770057 CLM HD8 15/03/2010

This manual is related to the following products: