Barco CLM HD8 R9050130 - Manual (Page 121)

12. Alignment menu
For more information about the physical installation, see chapter “General”, “Projector configurations”.
12.3 Lens adjustment
Quick way to enter the lens adjustment setting; press the lens button on the local keypad or the remote control.
Access to the lens adjustments
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Lens and press ENTER.
The lens adjustment menu is displayed.
Image 12-4
Image 12-5
Image 12-6
Zoom/focus the lens
1. Use the ▲ or ▼ key to select Zoom/Focus and press ENTER.
Image 12-7
Image 12-8
2. Use the ▲ or ▼ key to zoom the lens.
Use the ◄ or ► key to focus the lens.
3. Press ENTER to go to the shift adjustments.
Lens shift
1. Use the ▲ or ▼ key to select Shift and press ENTER or when in the Zoom/Focus menu press ENTER to toggle to the Shift menu.
R59770057 CLM HD8 15/03/2010 117