2 input configuration, Input configuration, Input menu – Barco CLM HD8 R9050130 User Manual
Page 64
8. Input menu
C
AUTION
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
jector.
8.2.2
Input configuration
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Slot module type and press ENTER.
The slot overview window is displayed with the actual situation filled out.
4. Use the ▲ or ▼ key to select a slot.
Press ENTER to open the Slot module type configuration window. This window is different for each module type.
5. Use the ▲ or ▼ key to select desired mode for the selected slot.
Image 8-1
Image 8-2
Image 8-3
Image 8-4
Possible results.
Input
module
Indication
Description
RGB AUTO
RGB input. Projector searches for the sync signal and projects the correct image.
YUV AUTO
YUV input. Projector searches for the sync signal and projects the correct image.
CVS/S-VIDEO AUTO
Video or S-Video input. Projector detects automatically which type of video is
connected to the inputs.
RGB HS/VS - CS
RGB input with separate horizontal and vertical sync or separate composite sync.
5 cable
60
R59770057 CLM HD8 15/03/2010