Barco CLM HD8 R9050130 - Manual (Page 32)

3. Physical installation
Image 3-18
Mounting to truss
8. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
9. Lock all four rigging clamps.
10.Install the safety cable. Hook one end into a provided hole. Route the cable around the truss and hook the other end into a
second hole in the carry handle.
Image 3-19
Security cable
C AUTION : Always mount the safety cable when suspending the projector.
28 R59770057 CLM HD8 15/03/2010