AMX Modero NXD/NXT-1200VG - Manual (Page 89)

Installation Procedures: 17" Panels
75 VG-Series Modero Touch Panels
2. Locate the edges of the two studs used in this installation. The location of the NXD is site dependant and
could involve notching more than one beam.
3. Remove any screws/nails from the surface, along the notched beam, before beginning the cutout process.
4. Follow the procedures outlined within Steps 1 - 5 on page 36 thru page 38 to carefully reinstall the LCD
panel back into the back box housing.
5. Cut out the surface for the Wall Mount using the dimensions shown in FIG. 61.
6. Remove the magnetic faceplate/bezel (A in FIG. 62) from the main NXD unit (B in FIG. 62) by gripping
the faceplate and pulling with gentle outward force.
In this sample installation, the left beam is notched and the back box rests against the
right beam.
FIG. 61 NXD-1700VG Wall Mount panel dimensions using #4 mounting screws