AMX Modero NXD/NXT-1200VG - Manual (Page 210)

Programming
196 VG-Series Modero Touch Panels
"^" Button Commands (Cont.)
^BOR
Set a border to a
specific border
style associated
with a border
value for those
buttons with a
defined address
range.
Refer to theTPD4 Border Styles by Name table on page 186 for more
information.
Syntax:
"'^BOR-,'"
Variable:
variable text address range = 1 - 4000.
border style name = Refer to theTPD4 Border Styles by Name table on page 186.
border value = 0 - 41.
Examples:
SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'"
Sets the border by number (#10) to those buttons with the variable text range of 500-504
& 510-515.
SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'"
Sets the border by name (AMX Elite) to those buttons with the variable text range of
500-504 & 510-515.
The border style is available through the TPDesign4 border-style drop-down list. Refer to
theTPD4 Border Styles by Name table on page 186 for more information.
^BOS
Set the video win-
dow slot ID # to
the new Slot
ID #.
The new Slot ID # is set only if the specified slot is not the same as the current slot
selected. Pass-thru sets the pass-thru mode to On.
This is an optional parameter and ONLY passes data to the PC.
Syntax:
"'^BOS-,,,thru>'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).slot number = 0 = No Video Fill
1 = Composite Video (Video Fill) (Video On)
1200V panels only have Slot 1 available.
2 = Component RGB
3 = Streaming Video. pass-thru = Pass-thru disable = 0 or Pass-thru enable = 2.Example:SEND_COMMAND Panel,"'^BOS-500,1,1'"Sets the button to display Composite video with no pass-thru. Example:SEND_COMMAND Panel,"'^BOS-500,1,2,1'"Sets the button to display Component video with pass-thru enabled. Refer to theVideo Slide-Out Menu section on page 130 for more information on the slot
assignments within a VG-Series panel.^BPPSet or clear the
protected page flip
flag of a button.Zero clears the flag.Syntax: "'^BPP-,'"Variable: variable text address range = 1 - 4000.protected page flip flag value range = 0 - 4 (0 clears the flag).Example:SEND_COMMAND Panel,"'^BPP-500,1'"Sets the button to protected page flip flag 1 (sets it to password 1).
thru>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
slot number = 0 = No Video Fill
1 = Composite Video (Video Fill) (Video On)
1200V panels only have Slot 1 available.
2 = Component RGB
3 = Streaming Video.
pass-thru = Pass-thru disable = 0 or Pass-thru enable = 2.
Example:
SEND_COMMAND Panel,"'^BOS-500,1,1'"
Sets the button to display Composite video with no pass-thru.
Example:
SEND_COMMAND Panel,"'^BOS-500,1,2,1'"
Sets the button to display Component video with pass-thru enabled.
Refer to theVideo Slide-Out Menu section on page 130 for more information on the slot
assignments within a VG-Series panel.
^BPP
Set or clear the
protected page flip
flag of a button.
Zero clears the flag.
Syntax:
"'^BPP-,'"
Variable:
variable text address range = 1 - 4000.
protected page flip flag value range = 0 - 4 (0 clears the flag).
Example:
SEND_COMMAND Panel,"'^BPP-500,1'"
Sets the button to protected page flip flag 1 (sets it to password 1).