AMX Modero NXD/NXT-1200VG - Manual (Page 43)

Touch Panel Accessories
29 VG-Series Modero Touch Panels
NXA-PCI80211G Wireless Card (FG2255-04)
The 1200V-Series and VG-Series Modero touch panels can connect to an internal NXA-PCI80211G mini-PCI
Wireless Card (FIG. 13) connected to two antennas (57-2250-10).
The NXA-PCI80211G card functions using a 2.4GHz bandwidth with a maximum data transfer rate of
54Mbps. This card is compatible with IEEE 802.11 standards such as: 802.11b and 802.11g.
The NXA-80211G allows the end-user to take advantage of larger bandwidth to utilize features such as:
streaming digital video and audio, wireless intercom, Motion JPEG, networked video, and standard wireless
Ethernet communication to both a NetLinx controller and networked computers.
Please follow your particular Wireless Access Point’s instruction manual for the correct procedures to setup
either a secured or unsecured connection.
FIG. 13 NXA-PCI80211G mini-PCI Wireless Card
FIG. 14 FCC Statement
This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1. This device must not cause harmful interference and
2. This device must accept all interference, including interference that interferes with the
operation of this device.
Modifications not expressly approved by the manufacturer will void the user’s authority
to operate the equipment.
WARNING: This device has been evaluated and found to be compliant with the FCC Rules
for RF Exposure when the device is operated at a minimum separation distance from the
user and nearby persons. Operation of this device at closer distances should be avoided.
FCC Statement:
Certifications: FCCID: CWU-WN2301A, CE, EN 60950, EN 300 328,
and RSS 210