AMX Modero NXD/NXT-1200VG - Manual (Page 168)

Firmware Pages and Descriptions
154 VG-Series Modero Touch Panels
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 105 for more detailed
instructions on how to use the G4 Web Control Settings page with the new web-based NetLinx Security
application.
G4 Web Control Page Elements (Cont.)
Web Control Port Allows you to enter the port value that the VNC Web Server runs on.
• Default value is 5900.
Maximum Number of
Connections This read-only field displays the maximum number of users that can be
simultaneously connected to the target panel via the web.
• Default value is 1.
Current Connection Count This read-only field displays the current number of users connected to the
target panel via the web. This value cannot exceed the Maximum number field.
G4 Web Control Timeout: Sets the length of time (in minutes) the panel can remain idle (no cursor
movements) before the session is closed and the user is disconnected.
• Minimum value = 0 minutes (panel never times-out)
• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)
FIG. 123 Sample relationship between G4 Web Control and Mange WebControl Connections window