AMX Modero NXD/NXT-1200VG - Manual (Page 154)

Firmware Pages and Descriptions
140 VG-Series Modero Touch Panels
Battery Base Page
This page (FIG. 115) allows you to alter/set the power warning preferences, monitor battery status
information, and alter the display times for the battery warnings. The fields on this page are populated
with information after the panel is connected to an optional NXA-BASE/B Battery Base containing up to
two NXT-BP batteries.
This page is ONLY available on Modero Table Top panels (NXT) using an NXA-BASE/B. The elements
of the Battery Base page are described in the table below:
FIG. 115 Battery Base page
Battery Base Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Charge Status: Time Remaining ( blue ) indicates the amount of charge time (use) remaining
on the batteries within the connected NXA-BASE/B.
Time Until Charged ( green ) indicates the amount of time remaining until the
batteries installed within the connected NXA-BASE/B are fully charged.
• Range = 0:00 - 12:59. This is read in HH:MM, hours and minutes.
Panel Shutdown: The Panel Shutdown UP/DN buttons alter the timeout value (in minutes).
• This value determines the number of minutes that would need to pass before
the panel automatically shuts-down.
• Once shutdown, the unit would have to be restarted. A zero value disables
this feature. Range = 0 - 240, default = 0 min.
Low Battery Warning: The Low Battery Warning UP/DN buttons alter the time value (in minutes)
available on the battery (for use) before the panel displays a low battery
warning.
• Range - 10 - 45, default = 15 min.