AMX Modero NXD/NXT-1200VG - Manual (Page 144)

Firmware Pages and Descriptions
130 VG-Series Modero Touch Panels
Video Slide-Out Menu
Pressing the on-screen Video button causes an option menu to slide outwards from the Navigation
buttons (FIG. 109). This option menu provides you with three choices: Video Adjustment, RGB
Adjustment, and Streaming Adjustment. Each of these options corresponds to an on-board slot position
where the related components reside (as seen below). As an example: pass-thru can only be enabled via
slot 2 because the information is routed through the NXA-RGB card residing in Slot 2 on the board. If
the panel does not have the related components, the option menu button will be greyed out. Refer to the
following sections for detailed information on each option.
Video Settings Page
The Video Adjustment page (FIG. 110) (accessed by pressing the Video Adjustment button on the Setup
page and then selecting the appropriate button from the option bar) sets the Video properties of the
incoming video signal from an NXA-AVB/RGB Breakout Box.
The elements of the Video Settings page are described in the table below:
FIG. 109 Video Adjustment Slide-Out Options Bar
FIG. 110 Video Adjustment page (showing default values)
Video Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Settings: • The Default Settings button sets the video settings to their default values
(indicated in this table).
• The Undo Changes button disregards any changes made on the page since
the last settings were saved.
• The Save Settings button saves any changes made to this page.
Slot 1 Slot 2 Slot 3
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.