Konica Minolta FK-502 - Manual (Page 460)

Reports and Lists 11
C451 11-37
11.17 Broadcast Report
Broadcast Report is printed automatically when sequential broadcast trans-
mission is completed.
ON/OFF can be set in [Sequential TX Report] of the Utility mode. Report out-
put timing (all destination batches/each destination) can be specified in
[Broadcast Result Report].
Destination: Any of the following is described.
-
Name registered with the destination in the Address Book or in the pro-
gram
- Recipient’s telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints:
Describes the number of sheets sent. The sent pages and the total number
of pages are described in fractional format.
Result:
OK: Described when communication is terminated normally.
S-OK: Described when communication has stopped.
PW-OFF: Described when operation power switch was turned OFF during
communication.
TEL: Described when there is telephone call.
NG: Described when there is communication error.
Cont: Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).