beautypg.com

Default scan/fax settings, Default scan/fax settings -28 – Konica Minolta FK-502 User Manual

Page 334

background image

Utility mode

10

C451

10-28

10.6

Setting initial setting value of fax function (Default
Scan/Fax Setting)

Initial setting value of Fax/Scan function can be set.

Fax/Scan function selected when main power supply is turned ON touched
or [Reset] key is pressed, can be set.

Default Scan/Fax Settings: Current Setting/Factory Default*
-

[Current Setting]
Each item set on the touch panel is registered as initial setting of Fax/
Scan function before entering on the Utility mode.

-

[Factory Default]
The Factory Default is registered in initial setting of Fax/Scan function.

* is a default value at the time of procurement.

2

Note

For this setting, display the Fax/Scan screen and then press the [Utility/
Counter] key.

Default Scan/Fax Settings

1

Display the User Settings screen as described in “Displaying User Set-
tings screen” on page 10-3.

2

Touch [Scan/Fax Settings].

Some items may not be displayed according to setting options.

In the Utility mode, the number displayed on button can be entered
and selected with the keypad. In case of [Scan/Fax Settings], enter
[4] with the keypad.

This manual is related to the following products: