Konica Minolta FK-502 User Manual
Page 395
Utility mode
10
C451
10-89
10
Enter the transmission source information (fax number) of transmission
source using numeric keypad, [+], [Space], [
←] or [→].
–
[+]: + is entered.
–
[Space]: Space is entered.
–
[
←]: Moves the cursor to the left.
–
[
→]:Moves the cursor to the right.
–
[Delete]: Deletes 1 character at a time located at the position of cur-
sor. When cursor is at right side, it gets deleted from the end.
–
In case of actual communication, [+], [space] is ignored.
–
To delete all entered characters, press [C] (clear) key on the control
panel.
11
Specify the forwarding destination.
–
To specify from registered destinations, touch [Select from Address
Book], specify the forwarding destination and then touch [OK].
–
To directly specify the box number, touch [Search by User Box
Number] and enter the Box number with the keypad.
–
Box No. can be specified within the range of 1- 999999999.
–
The Relay User Box is out of scope of the sorting destination.
12
Touch [OK].
13
Touch [OK] and then touch [OK] of the next screen.
TSI reception sorting is set.
14
Touch [Close] until it returns to Fax/Scan screen.