Konica Minolta FK-502 - Manual (Page 115)

To send a fax 2
C451 2-60
9
Enter the original count using the keypad and then touch [OK].
– Touch [No] to release the settings
10
Touch [OK].
The original page count is set and the machine returns to the Fax/Scan
screen.
11
Specify other settings if required.
– For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
12
Specify the destination.
– For details regarding specifying destinations, refer to “Specifying
only one destination” on page 2-17.
13
Press [Start] key.
– If the fax cannot be sent because the recipient’s line is busy, the re-
cipients number is redialed. For details regarding redialling, refer to
“When unable to send fax” on page 2-42.
– For aborting transmission, refer to “Aborting transmission” on
page 2-49.
– If you are unable to send a fax, refer to “Fax cannot be sent” on
page 4-2.
Transmission begins.