Setting the relay destination specifications, Setting the relay destination specifications -71 – Konica Minolta FK-502 User Manual
Page 231
Useful transmission functions
6
C451
6-71
!
Detail
This machine can be used as Intermediate relay station by setting the re-
lay box. In order to use this machine as a Intermediate relay station, the
[Relay RX] of the Utility mode must be set to [ON] and the relay box must
be registered. For details refer to “Specifying Relay box settings” on
page 9-42 and “Specifying the ON/OFF settings of the function (Function
ON/OFF Setting)” on page 10-65.
If the [Relay Printing] of the Utility mode in the Intermediate relay station
is set to [ON], the relayed original is printed after relay distribution. For de-
tails, refer to “Specifying the ON/OFF settings of the function (Function
ON/OFF Setting)” on page 10-65.
Setting the relay destination specifications
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
For details on loading originals, refer to “Loading the original” on
page 2-7.
3
Touch [Communication Settings].
4
Touch [Communication Method Settings].
5
Touch [F-Code TX].