Konica Minolta FK-502 User Manual
Page 175
Useful transmission functions
6
C451
6-15
–
For European models (Metric)
For setting the Frame Erase values in European models (Metric),
press the keypad or [-] and [+]. “Input Error” is displayed when a nu-
merical value outside the range is input. When “Input Error” is dis-
played or when there is any mistake while entering the deletion
width, press [C] (clear) key and enter the value again.
–
For North American models (Inch)
For setting the Frame erase values in North American models (Inch)
with fraction display, touch [
], change the numerator and de-
nominator and then touch [-] or [+].
In case of setting the frame erase values for numeric display in
North American models (Inch), press keypad or [-] and [+]. “Input
Error” is displayed when a numerical value outside the range is in-
put. When “Input Error” is displayed or when there is any mistake
while entering the deletion width, press [C] (clear) key and enter the
value again.
For details on switching between decimal and fraction values, refer
to the User’s Guide [Copy Operations].
6
Touch [OK].
Returns to Erase screen.