Konica Minolta FK-502 User Manual

Page 304

Registering/Specifying Settings

C451

9-44

Touch [New].

–

For details on Relay RX settings, refer to “Specifying the ON/OFF
settings of the function (Function ON/OFF Setting)” on page 10-65.

–

For details on operation for sending a fax by specifying relay desti-
nation, refer to “Sending the fax after specifying the relay destina-
tion (F-Code TX)” on page 6-70.

–

For details on registration of Group destination, refer to “Register-
ing Group destinations” on page 9-15.

Set [User Box No.], [User Box Name], [Relay Destination] and [Relay TX
Password].

–

Name of up to 20 characters can be registered.

–

Specify a Group destination that is set in advance for relay destina-
tion.

–

Enter a relay password with 0-9, * and #.

–

To change the user box number, touch [User Box No.], and then
use the keypad to type in a number. If a destination is already reg-
istered with the entered number, an error message appears and the
destination cannot be registered with the entered number.

–

Touch [Cancel] to discontinue the registration.

This manual is related to the following products:

bizhub C451