Konica Minolta FK-502 - Manual (Page 135)

Reception 3
C451 3-3
3.2 Auto reception (Fax only mode)
Specify this mode when the telephone line is to be used only for faxing. Fax-
es are automatically received on detection of the set number of rings. During
reception “Receiving” is displayed on the message display part of the
screen.
2
Note
The message is not displayed when [RX Display] is set to [No].
This mode operates when the [Receive Mode] is set to [Auto RX] in the [Line
Parameter Setting] of the Utility mode.
!
Detail
Refer to “Specifying transmission/ receiving mode (Line Parameter Set-
tings)” on page 10-58 regarding reception mode and settings for the
number of incoming rings.
Reception starts automatically
Incoming
Received
original