Konica Minolta FK-502 User Manual
Page 232
Useful transmission functions
6
C451
6-72
6
Enter the relay box number of the relay station in the [SUB Address]
with the keypad.
–
Up to 20 digits can be entered in the [SUB Address] and [Pass-
word].
–
Relay password is mandatory. Numbers 0-9 and # and * can be en-
tered in the password.
–
If an incorrect number has been entered, touch [Delete] and then
correct the number.
–
When [C] (clear) key is pressed, all entered contents are deleted.
–
Touch [No] to cancel the settings.
7
Touch [Password] and enter the relay password.
8
Touch [OK].
Returns to the Communication Method Settings screen.
9
Touch [OK].
Returns to Communication Settings screen.
10
Touch [Close].
Returns to Fax/Scan screen.
11
Set other functions if required.
–
For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
–
For details on Original Settings, refer to “Original Settings” on
page 6-4.
–
For details on Communication Settings, refer to “Communication
Settings” on page 6-5.