Konica Minolta FK-502 User Manual
Page 229
Useful transmission functions
6
C451
6-69
–
Touch [No] to cancel the settings.
7
Touch [OK].
Returns to the Communication Method Settings screen.
8
Touch [OK].
Returns to Communication Settings screen.
9
Touch [Close].
Returns to Fax/Scan screen.
10
Set other functions if required.
–
For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
–
For details on Original Settings, refer to “Original Settings” on
page 6-4.
–
For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
11
Specify the destination.
–
For details on destination, refer to “Specifying only one destination”
on page 2-17, “Specifying multiple destinations (Sequential broad-
cast transmission or broadcast transmission)” on page 2-31.
12
Press [Start] key.
–
Press [Stop] key to stop the original registration.
The scanned original is stored in the memory as a scheduled job and
transmission is started.