Konica Minolta FK-502 - Manual (Page 111)

To send a fax 2
C451 2-56
2.15 Memory transmission and quick memory transmis-
sion
There are two ways of sending originals using this machine: quick memory
transmission and memory transmission.
Memory transmission
In this method, a whole original is scanned in advance, stored in the memory,
and then the fax is transmitted. The total number of pages is attached auto-
matically to the page numbering in the transmission source information, and
an image of the first page of the sent original is included in the TX Result Re-
port. However, if the original contains many pages or if it was scanned with
a fine image quality (high resolution) causing the data to become very large,
the memory may become full.
Additionally, if quick memory transmission is not specified, as a rule the ma-
chine automatically uses memory transmission.
Quick memory transmission
With this feature, the machine starts to transmit the fax after 1 page of the
original has been scanned. Even if an original has many pages, a fax can be
sent without filling the memory using this function.
2
Note
Following functions cannot be used simultaneously.
Memory transmission, Separate Scan, Frame Erase, Book Copy, Scan
Size, Send & Print, Simplex/Duplex (Cover + 2-Sided), Mixed Original,
Polling RX, Timer TX, Polling TX, Preview, Off-Hook
To use quick memory transmission
1
Press [Fax/Scan] key, and make the Fax/Scan screen display.
2
Load the original to be faxed.
– Refer to “Loading the original” on page 2-7 for details on loading
the original.
3
Touch [Communication Settings].
4
Touch [Communication Method Settings].