Konica Minolta FK-502 - Manual (Page 40)

Before using this machine 1
C451 1-3
1.2 Using the control panel
Control panel
1
2
4
5
3
6
7
8
13 14 12 9
15
16
17
18
11 10
19
20
21
22
No. Name Description
1 Touch panel Displays various setting screens and messages.
2 Main Power indicator Lights up in green when the [Main Power switch] is ON.
3 Sub power switch Used to turn power ON/OFF to the control panel. When
turned off, the machine enters a state where it conserves
energy.
4 [Mode Memory] key Desired fax settings can be registered as a program des-
tination, and used to send faxes by recalling the regis-
tered program destination. (page 2-34, page 9-21)
5 [Utility/Counter] key Press to switch between the Utility mode screen and the
sales counter screen.
6 [Reset] key Press to clear all settings (except registered settings) en-
tered in the control panel or touch panel.
7 [Interrupt] key Press to enter Interrupt mode. While the machine is in In-
terrupt mode, the indicator on the [Interrupt] key lights up
in green and the message “Interrupted” appears on the
touch panel. To release Interrupt mode, press [Interrupt]
key again.
8 [Stop] key Press to stop scanning of the original.