Konica Minolta FK-502 - Manual (Page 314)

Utility mode 10
C451 10-8
Administrator Settings > System Settings > Power Save Settings
Set the power save mode settings. (page 10-30)
Administrator Settings > System Settings > Output Settings > Print/Fax
Output Settings
The printing method for received original is set. (page 10-33)
Administrator Settings > System Settings > Restrict User Access > Re-
strict Access to Job Settings> Registering and Changing Address
Whether or not to prohibit changes in the registered destination of Fax is set.
(page 10-35)
Administrator Settings > System Settings > Restrict User Access > Re-
strict Operation > Restrict Broadcasting
Whether or not to prohibit sending a fax to multiple destinations is set.
(page 10-37)
Item Description Values that can be set
Enter Power Save Mode When a fax is received in power
save mode, settings about
whether to shift to the power
save mode after a fixed period of
time and after the completion of
print (normal state) or to shift to
power save mode immediately
(instant) are made. Normal/Immediately*
Item Description Values that can be set
Fax The printing method for received
original is set. Batch Print*/Page Print
Item Description Values that can be set
Registering and Chang-
ing Address Whether or not to prohibit
changes in the registered desti-
nation of Fax is set. Allow*/Restrict
Item Description Values that can be set
Restrict Broadcasting Whether or not to prohibit send-
ing a fax to multiple destinations
is set. ON/OFF*