Konica Minolta FK-502 - Manual (Page 320)

Utility mode 10
C451 10-14
Administrator Settings > Fax Settings > Function Settings > Memory RX
Settings
Whether or not to use the Memory RX function is set. (page 10-69)
Administrator Settings > Fax Settings > Function Settings > Closed Net-
work RX
Whether or not to use the closed network reception function is set.
(page 10-72)
Administrator Settings > Fax Settings > Function Settings > Forward TX
Setting
Set whether or not to use the Forwarding fax function. (page 10-75)
Item Description Values that can be set
Memory RX Settings Whether or not to use the Memory
RX function is set.
When these settings are valid, set a
password (within 8 digits) to be used
at the time of printing.
Memory RX is the function of printing
the received original after storing in
the memory for some time and then
printing after the receiving such in-
struction and not printing it immedi-
ately. Set password in 8 digits/NO*
Item Description Values that can be set
Closed Network RX Whether or not to use the closed net-
work reception function is set. When
these settings are valid, set the pass-
word (4 digits) to be used in closed
network reception. Closed network
reception is a function that accepts
the communication only from the
caller machine that matches the
password. Set password in 4 digits/No*
Item Description Values that can be set
Forward TX Setting Set whether or not to use the For-
ward TX Setting. When set to [Yes]
output function and forwarding des-
tination are set.
Forwarding box is a function that for-
wards the received original to other
party specified in advance. Yes/No*
Following settings are spec-
ified when set to [ON].
Output Method: Forward &
Print/Forward & Print (If TX
Fails)
Forwarded destination set-
tings
Select line settings