Konica Minolta FK-502 - Manual (Page 236)

Useful transmission functions 6
C451 6-76
6
Select the desired sender name from the list to change the sender
name.
7
Touch [OK].
Returns to Communication Settings screen.
8
Touch [Close].
Returns to Fax/Scan screen.
9
Set other functions if required.
– For details on Scan Settings, refer to “Specifying scanning condi-
tions” on page 2-12 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
10
Specify the destination.
– For details on destination, refer to “Specifying only one destination”
on page 2-17 and “Specifying multiple destinations (Sequential
broadcast transmission or broadcast transmission)” on page 2-31.
11
Press [Start] key.
– If the fax cannot be sent because the recipient’s line is busy, the re-
cipients number is redialed. For details on redial, refer to “When un-
able to send fax” on page 2-42.
– To stop the transmission, refer to “Aborting transmission” on
page 2-49.
– If the fax could not be sent, refer to “Fax cannot be sent” on
page 4-2.
The scanned original is stored in the memory as a scheduled job and
transmission is started.