Konica Minolta FK-502 - Manual (Page 367)

Utility mode 10
C451 10-61
10.17 Settings of transmission and reception mode (TX/RX
Settings)
Handling the file at the time of polling transmission or printing methods at the
time of reception are set.
Duplex Print (RX): ON/OFF*
-
When set to [ON], the received original is printed on both sides of the pa-
per.
- When [Print Separate Fax Pages] is [ON], it is not displayed.
Letter/Ledger over A4/A3: European models: ON/OFF*, North American
models: ON*/OFF
-
When it is set to [ON] inch system paper is selected on priority for the
printing paper of received original.
Print Paper Selection: Auto Select*/Fixed Size/Priority Size
-
When the default size is specified:
The paper is printed by the default size. When priority size is not set, it is
printed in the paper of the nearest size.
- When the fixed size is specified:
The paper is printed by the fixed size only.
Print Paper Size *1 : European models: A3 / B4 / A4* / 8-1/2 Ч 11 / 8-1/2 Ч 14
/ 11 Ч 17, North American model: 8-1/2 Ч 11* / 8-1/2 Ч 14 / 11 Ч 17 / A3 / B4
/ A4
-
The paper size to output the received original is specified.
Initial setting differs as per settings of [Letter/Ledger over A4/A3].
- *1 Set the [Tray Selection for RX Print] to [Auto] to validate the setting of
[Print Paper Size].
Incorrect User Box No. Entry: Print*/Show Error Message/Auto Create User
Box
-
Operation when unregistered box number is specified is set for the fax re-
ception-using box. [Auto Create User Box] is selected, box of entered
number is created.
- [Auto Create User Box] cannot be selected when the password rules are
set to ON.
For details on the password rules, refer to the User’s Guide [Copy Oper-
ations].
Tray Selection for RX Print *2 : Auto*/ Tray 1/ Tray 2/ Tray 3/ Tray 4
- Paper tray is set when paper tray used in output of the received originals
is to be fixed.
- *2 Type of the tray differs as per the loaded option.