beautypg.com

8 specifying relay box settings, Registering relay user box, Specifying relay box settings -42 – Konica Minolta FK-502 User Manual

Page 302: Registering relay user box -42

background image

Registering/Specifying Settings

9

C451

9-42

9.8

Specifying Relay box settings

Relay broadcast function that uses F-code can be used in this machine. The
[Relay RX] of the Utility mode should be set to [ON] and the Relay User Box
should be registered for using this machine as intermediate relay station.
Maximum 5 Relay User Box can be registered.

!

Detail

Notify the set details to the originating station that sends the original.

The Terminating Station information should be registered as a group des-
tination in advance to use the relay distribution function.

Registering Relay User Box

!

Detail

Relay User Box can be registered from “PageScope Web Connection”.
For details on the using PageScope Web Connection, refer to the User’s
Guide [PageScope Web Connection Operations].

1

Press [Utility/Counter] key to display the Utility mode screen.

2

Touch [One-Touch/User Box Registration].

In the Utility mode, the number displayed on button can be entered
and selected on the keypad. For [One-Touch/User Box Registra-
tion], enter [1] on the keypad.

[One-Touch/User Box Registration] cannot be registered or
changed when [Registering and Changing Address] is set to [Re-
strict] in the Utility mode. Contact the administrator to register or
change the [One-Touch/User Box Registration].

This manual is related to the following products: