Konica Minolta FK-502 - Manual (Page 318)

Utility mode 10
C451 10-12
Administrator Settings > Fax Settings > TX/RX Settings
Handling the file at the time of polling transmission or printing methods at the
time of reception are set.
The items related to reception are set. (page 10-61)
*1
Set the [Tray selection for RX Print] to [Auto] to validate the setting of [Print
Paper Size].
*2 Type of the tray differs as per the loaded option.
Item Description Values that can be set
Duplex Print (RX) When set to [ON], the received origi-
nal is printed on both sides of the pa-
per. ON/OFF*
Letter/L er over A4/A3 When it is set to [ON] inch system pa-
per is selected on priority for the
printing paper of received original. European models: ON/OFF*
North American model: ON*/
OFF
Print Paper Selection When priority of size is set:
It is printed in priority size. When pri-
ority size is not set, it is printed in the
paper of the nearest size.
When size is fixed:
It is printed only in the set size. Auto select*/Fixed Size/Pri-
ority Size
Print Paper Size *1 Paper size for printing the received
original is set.
Initial setting differs as per settings of
[Letter/L er over A4/A3]. European models: A3 / B4 /
A4* / 8-1/2 Ч 11 / 8-1/2 Ч 14
/ 11 Ч 17
North American model: 8-1/
2 Ч 11* / 8-1/2 Ч 14 / 11 Ч 17
/ A3 / B4 / A4
Incorrect User Box No.
Entry Operation when unregistered box
number is specified is set for the fax
reception-using box. [Auto Create
User Box] is selected, box of entered
number is created. Print*/Show Error Message/
Auto Create User Box
Tray Selection for RX
Print
*2
Paper tray is set when paper tray
used in output of the received origi-
nals is to be fixed. Auto*/Tray 1/Tray 2/Tray 3/
Tray 4
Min. Reduction Output magnification of received
original is set. 87 to 96%*/Full Size
Print Separate Fax Pag-
es If it is set to [ON], the original longer
than the fixed size is received and
printed by page division. ON/OFF*
File After Polling TX Set whether to delete the original af-
ter the completion of polling trans-
mission. Delete*/Save
No. of Sets (RX) Number of copies (prints) of received
original is set. 1* to 10