11 reports and lists, 1 report / list types, Reports – Konica Minolta FK-502 User Manual
Page 425: Report / list types -2, Reports -2
Reports and Lists
11
C451
11-2
11
Reports and Lists
11.1
Report / List Types
This machine prints the following types of reports and lists.
Reports
Reports include automatically printed reports, reports for which printing
methods can be set and reports for which printing commands can be given
if required.
Report Name
Description
Activity Report
Sending and receiving records are described in this report.
Maximum 700 communications including transmission and
reception are recorded on different pages for transmission
and reception respectively. The Activity Report is printed
automatically and reports displaying transmission records
only, reception records only or transmission and reception
records together can be printed independently.
Printing interval can be selected from Daily/Every 100
comm./100/daily in Administrator Settings of the Utility
mode.
If the Activity Report output is set to [Daily] or [100/daily],
the time to output the report can be specified.
Activity Report can be printed by selecting the following
contents if the buttons are touched in the order of [Job
List]>[Job Details]>[Send]>[Job History]>[Comm. List].
TX Report
RX Report
Activity Report
TX Result Report
Transmission result is printed automatically. The printing
time can be selected from ON/If TX Fails/OFF in the TX Re-
sult Report settings of the Utility mode.
Polling TX Report
Polling TX Report is printed automatically when [TX Result
Report] in the [Report Settings] of the Utility mode is set to
[ON] or [If TX Fails].
Polling RX Report
Polling RX Report is printed automatically when [TX Result
Report] in the [Report Settings] of the Utility mode is set to
[ON] or [If TX Fails].
Sequential Polling RX Report
The Sequential Polling RX report is printed automatically
when [Sequential TX Report] in the [Report Settings] of Util-
ity mode is set to [ON].
Broadcast Report
Broadcast Report is printed automatically when the se-
quential broadcast ends when [Sequential TX Report] in the
[Report Settings] of Utility mode is set to [ON].
Reservation Communication Re-
port
Reservation Communication Report is printed automatical-
ly when transmission is reserved when [Timer Reservation
TX Report] in the [Report Settings] of the Utility mode is set
to [ON].