Konica Minolta FK-502 - Manual (Page 221)

Useful transmission functions 6
C451 6-61
6.19 Sending the fax after specifying the telephone line
(Select Line settings)
Select Line settings
When the fax multi line is installed, transmission is possible after specifying
[Line 1] or [Line 2].
2
Note
Fax multi line must be installed.
Line cannot be specified when “Line 2 Settings” of [Multi Line Settings] is
[RX Only].
!
Detail
For details on [Multi Line Settings], refer to “Specifying the communica-
tion methods of Extended telephone lines (Multi Line Settings)” on
page 10-101.
Sending the fax after specifying the telephone line
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to “Loading the original” on
page 2-7.
3
Touch [Communication Settings].
4
Touch [Line Settings].