Konica Minolta FK-502 - Manual (Page 435)

Reports and Lists 11
C451 11-12
11.4 Polling TX Report
Polling TX Report is printed automatically.
ON / If TX Fails / OFF can be set for [TX Result Report] in the Utility mode.
Destination: Recipient’s machine ID is described.
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints:
Describes the number of sheets sent. In case of memory transmission, the
sent pages and the total number of pages are described in fractional format.
Result:
OK: Described when communication is terminated normally.
S-OK: Described when communication has stopped.
PW-OFF: Described when operation power switch was turned OFF during
communication.
TEL: Described when there is telephone call.
NG: Described when there is communication error.
Cont: Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).
No Ans: Described when there is no response from the recipient.
Busy: Described when communication is not possible as the recipient’s
line is busy.
M-Full: Described when it is not possible to receive a fax when the fax file
memory becomes full during reception.