6 sequential polling rx report, Sequential polling rx report -16 – Konica Minolta FK-502 User Manual
Page 439
Reports and Lists
11
C451
11-16
11.6
Sequential Polling RX Report
Result of polling to multiple destinations is printed automatically.
ON/OFF can be set in [Sequential TX Report] of the Utility mode.
Destination: Any of the following is described.
-
Destination name for recipients’ whose destination name is registered in
Address Book
-
Recipient’s telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints: Describes the number of sheets sent.
Result:
OK:
Described when communication is terminated normally.
S-OK:
Described when communication has stopped.
PW-OFF:
Described when operation power switch was turned OFF during
communication.
TEL:
Described when there is telephone call.
NG:
Described when there is communication error.
Cont:
Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).
No Ans:
Described when there is no response from the recipient.
Busy:
Described when communication is not possible as the recipient’s
line is busy.
M-Full:
Described when it is not possible to receive a fax when the fax file
memory becomes full during reception.