14 relay tx result report, 14 relay tx result report -32 – Konica Minolta FK-502 User Manual
Page 455
Reports and Lists
11
C451
11-32
11.14 Relay TX Result Report
Relay TX Result Report is printed automatically when there is a relay trans-
mission to a relay distribution destination as intermediate relay station.
ON/OFF can be set in [Relay TX Result Report] of the Utility mode.
Destination: Any of the following is described.
-
Destination name when destination name is registered in Address Book.
-
Recipient’s telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints: Describes the number of sheets sent.
Result:
OK:
Described when communication is terminated normally.
S-OK:
Described when communication has stopped.
PW-OFF:
Described when operation power switch was turned OFF during
communication.
TEL:
Described when there is telephone call.
NG:
Described when there is communication error.
Cont:
Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).
No Ans:
Described when there is no response from the recipient.
Busy:
Described when communication is not possible as the recipient’s
line is busy.
M-Full:
Described when it is not possible to receive a fax when the fax file
memory becomes full during reception.