Konica Minolta FK-502 - Manual (Page 364)

Utility mode 10
C451 10-58
10.16 Specifying transmission/ receiving mode (Line Pa-
rameter Settings)
The items related to transmission and reception is specified.
Dialing Method:
European models: PB
North American models: PB*/10pps
-
The dialing method is specified
Receive Mode: Auto RX*/Manual RX
-
In case of automatic reception, select the Auto RX settings and if the line
is often busy due to external phone connection etc., select the Manual RX
settings.
No. of RX Call Rings: 0-15 times (2 times*)
-
The frequency of pseudo ring-back tones from reception of incoming call
till actual reception is set.
Number of Redials: European models: 0 to 7 times (3 times*), North American
models: 0 to 7 times (1 time)
-
Number of redials are set when recipient is not responding as line is busy
etc.
Redial Interval: 1 to 15 minutes (3 minutes*)
-
Interval for redial is set.
Line Monitor Sound: ON/OFF*
-
At the time of communication, when the ring on the line is heard from the
speaker, it is set to [ON].
Line Monitor Sound Vol.: 0 to 31 (16*)
-
Volume of the speaker is set.
* is a default value at the time of procurement.