RADWAG PS 510.R2.CT Carat Balance - Manual (Page 94)

- 94 -
Once the button has been pressed, the name of the first available
function is shown.
or - select the working mode
- enter the selected working mode
The setup for the functions is described further in this manual.
18.1 Setup for availability of working modes
In this group of parameters, a user declares functions which are to be available
for the user after pressing button.
It is possible for a user to switch off the functions that are not used during
working with the balance. This can be done by setting the availability
parameter to <NO>.
Follow the scheme shown below: