RADWAG PS 510.R2.CT Carat Balance - Manual (Page 169)

- 169 -
Example 2
:
Command
:
OMI - give accessible working modes
Response
:
OMI - accessible working modes are given;
2 number
4
12
OK - command carried out
OMS - Set working mode
Command overview:
Command sets acessible working modes.
Format: OMS_n
Accessible responses:
OMS_OK
- command carried out
OMS_E
- error in-course of command execution, no parameter
or incorrect format
OMS_I
- command understood but not accessible at this
moment
n
– parameter, decimal value determining working mode number. To see detailed
description go to OMI command.
Example
:
Command
:
OMS_13 - set working mode Statistics
Response
:
OMS_OK - working mode Statistics selected
OMG - Give current working mode
Command overview:
Command gives selected working modes.
Format: OMG
Accessible responses:
OMG_n_OK
- command carried out, current working mode given
OMG_I
- command understood but not accessible at this
moment
n
– parameter, decimal value determining working mode number. To see detailed
description go to OMI command.