RADWAG PS 510.R2.CT Carat Balance - Manual (Page 168)

- 168 -
Accessible responses:
K0_I CR LF
- command understood but not accessible at this moment
K0_OK CR LF
- command carried out
OMI - Give available working modes
Command overview:
Command returns acessible working modes.
Format: OMI
Accessible responses:
OMI
n_”Mode name” :
n_”Modename”
OK
- command carried out, accessible working
modes returned
OMI_I
- command understood but not accessible at
this moment
Mode name
– parameter, working mode name, inserted inbetween inverted
comas. The name takes form given on a particular balance display, it is provided in
a caurrently selected language.
n
– parameter, decimal value determining working mode number
n → 1 – Weighing
2 – Parts Counting
3 – Deviations
4 – Dosing
5 – Formulas
6 – Animal Weighing
8 – Density of Solid Bodies
9 – Density of Liquids
10 – Peak Hold
11 – Totalizing
12 – Checkweighin
13 – Statistics
14 – Pipettes Calibration
CAUTION: Working modes numbering is identical for each kind of balance. The
numbers are assigned to working modes names. Some balances give only the
number as a response.
Example 1
:
Command
:
OMI - give accessible working modes
Response
:
OMI - accessible working modes are given;
2_”Parts Counting” number + name
4_”Dosing”
12_”Checkweighing”
OK - command carried out