RADWAG PS 510.R2.CT Carat Balance - Manual (Page 36)

- 36 -
10 WEIGHING
10.1 Required weighing procedures
In order to ensure long lasting use of a balance and reliable
measurement of weighed loads, follow below procedures:
 Start the balance with no load on the weighing pan
(permissible value of load on the weighing pan on balance
start is ±10% of its maximal capacity).
 Load balance’s weighing pan steadily with no shocks:
YES NO
 Place weighed loads centrally on the weighing pan:
YES NO
 Avoid side loading, in particular side shocks:
NO NO