RADWAG PS 510.R2.CT Carat Balance - Manual (Page 106)

- 106 -
18.4.2. Returning to the weighing mode
18.5 Deviations % against the mass of the standard
The balance software has the option of deviation control (in percentage)
between weighed loads mass samples and the reference mass standard. The
mass of the standard can be determined by its weighment or by typing into the
balance’s memory by its user.
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <DEVIATIONS> the following options are available, which a
user can assign to each of the F buttons:
NONE
– no function assigned to the button
ENTER SAMPLE
– function initiates the option of entering reference
mass to control mass deviation
DETERMINE SAMPLE
– function initiates the option of entering
reference mass to control mass deviation
SELECT PRODUCT
– function initiates the option of selecting a product
from product database
LOG IN
– function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE
– function initiates the option of inserting packaging mass
SELECT TARE
– function initiates the option of selecting packaging
mass from product database
PRINT HEADER
– function initiates the print-out of a designed header