RADWAG PS 510.R2.CT Carat Balance - Manual (Page 166)

- 166 -
Responce format
1 2 3 4-12 13 14 15 16 17 18 19
D H space mass space unit space CR LF
Mass - 9 characters with right justification
Unit - 3 characters with left justification
Set mass value of a single item (only for PARTS COUNTING)
Format: SM_XXXXX CR LF, where: _ - space, XXXXX – mass format
Accessible responses:
SM_OK CR LF
SM_I CR LF
- command understood
- command understood but not accessible at this moment (eg.
mode other than PARTS COUNTING)
ES CR LF - command not recognised (mass format incorrect)
Set target mass value (e.g. for DOSING)
Format: TV_XXXXX CR LF, where: _ - space, XXXXX – mass format
Accessible responses:
TV_OK CR LF
TV_I CR LF
- command understood
- command understood but not accessible at this moment (eg.
WEIGHING mode)
ES CR LF - command not recognised (mass format incorrect)
Set reference mass value (e.g. for DEVIATIONS)
Format: RM_XXXXX CR LF, where: _ - space, XXXXX – mass format
Accessible responses:
RM_OK CR LF
RM_I CR LF
- command understood
- command understood but not accessible at this moment (eg.
mode other than DEVIATIONS)
ES CR LF - command not recognised (mass format incorrect)
Give balance serial number
Format: NB CR LF
Accessible responses:
NB_A_”x” CR LF
NB_I CR LF
- command understood, returns serial number
- command understood but not accessible at this moment
x – serial numer of the device (inserted inbetween inverted commas)
Example
:
Command
:
NB CR LF – give serial number
Response
:
NB_A_”1234567” – serial numer of the device – ”1234567”