RADWAG PS 510.R2.CT Carat Balance - Manual (Page 54)

- 54 -
12.4 Backlight and adjusting display brightness
Enables setting the brightness of the backlight or switching off the display
brightness completely.
100
- maximum brightness of the backlight
10
- minimum brightness of the backlight
NONE
- display brightness switched off
12.5 Backlit turn-off time
Parameter enables use of function responsible for activation
of the display stand-by mode when weighing process is not being performed (stable
indication is a necessary condition for activation of the stand-by mode).
NONE
– backlit turn-off time not activated
0.5; 1; 2; 3; 5
– time given in minutes
If the software registers stable indication for a specified time interval, parameter
, than the display backlit function is turned-off immediately.
The backlit function is turned on upon change of indication (no stability
pictogram on the display) or pressing any key on the balance keypad. Backlit
turn-off time functions when balance menu is entered.
12.6 Auto switch-off
Parameter enables use of function responsible for
automatic display deactivation (functions as button ). Upon display
deactivation the other subassemblies are powered and the balance turns to
stand-by mode.
NONE
– auto switch-off not activated
0.5; 1; 2; 3; 5
– time given in minutes
If the software registers stable indication for a specified time interval, parameter
, than the display is turned-off immediately (inactive backlit
function, no indication on the display, clock displayed).
To start-up the balance it is necessary to press button located on the
balance keypad. The balance will automatically return to weighing.
Balance may not be turned off if any proces is started or if balance menu is
entered.