RADWAG PS 510.R2.CT Carat Balance - Manual (Page 170)

- 170 -
Example
:
Command
:
OMG - give current working mode
Response
:
OMG_13_OK - balance operates in working mode Statistics
Activate sound signal
Command overview:
Command activates BEEP sound signal for a specified amount of time.
Format: BP_TIME
Accessible responses:
BP_OK
- command carried out, BEEP sound signal activated
BP_E”
- no parameter or incorrect format
BP_I
- command understood but not accessible at this
moment
TIME
– parameter, decimal specifying how long shall the sound last, parameter
given in [ms]. Recommended range <50 - 5000>.
If value greater than the permissible high limit is given, than BEEP sound is
operated for the maximum permissible amount of time.
Example
:
Command
:
BP_350 - activate BEEP for 350 ms
Response
:
BP_OK - BEEP activated
CAUTION! – BEEP sound activated via BP command is inhibited if in-course of its
activation the sound is activated by means of other device: keypad, touch panel,
proximity sensors.
Send all the implemented commands
Format: PC CR LF
Response: PC_A_”Z,T,S,SI, SU,SUI,C1,C0,CU1,CU0,PC"
- command carried out, the indicator sent all the implemented commands