Kramer Electronics VS-162V - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Video Matrix Switcher
4
You can control the VS-162V:
• Using the front panel buttons
• Remotely, by RS-485 or RS-232 serial commands transmitted by
a touch screen system, PC, or other serial controller
• Remotely, from the Kramer RC-IR2 Infrared Remote Control
Transmitter
• An external remote IR receiver (optional), see section
4.1
• Via external dry-contact push buttons
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching,
and elevated noise levels (often associated with low quality
cables)
• Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VS-162V in a location free from moisture and away from
excessive sunlight and dust
4 Your Video Matrix Switcher
Figure 1 and Table 1 define the front and rear panels of the VS-162V.