Kramer Electronics VS-162V - Manual (Page 55)

MENU Commands
51
51
3. Press the OUT button 1 to deactivate the External keys.
The TAKE LED flashes and the displays show the messages:
Turn OFF external keys?
Press TAKE to execute
current:
X-key ON
4. Press the TAKE button.
The displays show the messages:
External Keyboard mode
changed
current:
X-key OFF
11.7 Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
• At ONCE mode in which setups are stored/recalled immediately
without the need for user confirmation
• CONFIRM mode in which storing/recalling setups require user
confirmation. The CONFIRM mode is the default
1
To set the STORE/RECALL KEYBOARD mode to the AT ONCE mode,
instead of the CONFIRM (default) mode, do the following:
for
storing/recalling setups and is recommended to prevent
erroneously storing/recalling of setups
1. Press the MENU button until reaching the STORE/RECALL setting.
The MATRIX display shows the message:
STORE/RECALL setting
yes -> TAKE, next -> MENU
2. Press the TAKE button and choose the appropriate Outkey 1 for the AT
ONCE mode (Outkey 2 is for the CONFIRM mode).
The displays show the messages:
STO/RCL mode
changed
current:
At once
11.8 Choosing the INDICATE Setting
Choose what is displayed during regular operation: between scrolling the
switcher setup as
Figure 22 illustrates, and showing the IN/OUT range
2
1 The AT ONCE mode is the default for all actions except storing/recalling setups
.
2 Useful in an expanded matrix configuration