Kramer Electronics VS-162V - Manual (Page 51)

MENU Commands
47
47
3. Press the OUT button # 1.
The displays show the messages:
STAND ALONE UNIT (Mach# 01)?
Press TAKE to confirm
Current
Matrix
4. Press the TAKE button again.
The MATRIX display shows the message:
MACHINE ADDRESS changed
now STAND-ALONE
11.4.3 Changing to a Different Large Matrix MACHINE ADDRESS
To set the MACHINE ADDRESS:
1. Press the MENU button until you reach the MACHINE ADDRESS
command.
The MATRIX display shows the message:
MACHINE ADDRESS setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
OUTkey 1: Stand-Alone UNIT
2: Large Matrix
Current
Matrix
3. Press the OUT button # 2.
The displays show the messages:
set NEW matrix
new -> TAKE leave old -> MENU
current:
16x32
4. Press the TAKE button again.
The displays show the messages:
READY to set MACHINE ADDRESS
use OUTkey 1-9, 0
current #
1
5. Press an OUT button # 1-9, 0.
The STATUS Display shows the message:
current: x
Where x is the OUT button # pressed
6. Press the TAKE button again.
The TAKE LED flashes and The displays show the messages:
READY to change MACH. ADDR.
Press TAKE to confirm
from # 01
to #0x